Stuttering/slow response of buttons/touch screen?

Fix laggy buttons or touch screen on an AZDOME dash cam — power cable, overheating, and faulty accessories.

The power cable used is not the original factory one, resulting in insufficient power supply. Please confirm whether the power cable used is the original matching model for this dashcam. If it is not the original, it is recommended to replace it with the factory power cable for troubleshooting.
If the dashcam has been running under heavy load for an extended period, it may overheat and exhibit this phenomenon; you can restore factory settings and then confirm.
Malfunction due to faulty accessories: In the powered-off state, remove the memory card from the dashcam and unplug the middle or rear camera interface, then power on the device. Press the R hole (Reset) briefly or long until the device responds.

The power cable used is not the original factory one, resulting in insufficient power supply. Please confirm whether the power cable used is the original matching model for this dashcam. If it is not the original, it is recommended to replace it with the factory power cable for troubleshooting.
If the dashcam has been running under heavy load for an extended period, it may overheat and exhibit this phenomenon; you can restore factory settings and then confirm.
Malfunction due to faulty accessories: In the powered-off state, remove the memory card from the dashcam and unplug the middle or rear camera interface, then power on the device. Press the R hole (Reset) briefly or long until the device responds.